Quick summary
- Accepted files: vector PDF plan sets or IFC models.
- Maximum file size: 25 MB per upload.
- Best results come from Roof Plan, Elevations, and Opening Schedule sheets.
- Extraction is a starting point, not a verified takeoff — every value must be reviewed.
Why this is separate from aerial reports
Services like EagleView or HOVER fly an existing structure and return measurements. New construction has no existing structure to fly, so there is nothing for them to measure. The authoritative source for a new build is the plan set produced by the architect, structural engineer, or roofing consultant.
What files work best
Vector PDF (most common)
A PDF exported directly from CAD/BIM software preserves the underlying geometry and text. Scanned or raster PDFs — files that are basically photos of drawings — cannot be read reliably and should be avoided.
Tip: if zooming in makes lines blurry, the PDF is raster and extraction quality will drop.
IFC model (most reliable)
IFC (Industry Foundation Classes) is an open BIM format. Because it contains structured 3D objects rather than just lines on a page, extraction is typically more accurate and requires less manual cleanup. Not every architect exports IFC, but it is the best option when available.
Plan sheets to include
A full plan set can be large. If the total is over 25 MB, upload the sheets that contain measurable information first. These are the highest-value sheets:
- Roof plan. Shows ridge lines, valleys, hips, eaves, rakes, and overall roof area. This drives the bulk of the material calculation.
- Elevations. Side views show wall heights, opening locations, and trim lines. Essential for wall panel, soffit, and fascia takeoffs.
- Opening schedule. A table of windows, doors, and other openings with exact widths and heights. This prevents over-ordering wall panels and flashings.
- Foundation / floor plan. Useful for confirming footprint and perimeter dimensions when the roof plan is unclear.
How the process works
- Contractor uploads the plan set. The contractor attaches the PDF or IFC to the job. Only one file per upload is supported; upload additional sheets separately if needed.
- Vendor runs extraction. A vendor admin clicks Extract. The AI reads the drawings and returns roof facets, wall sections, openings, and linear measurements.
- Vendor reviews every value. Extraction reports what the drawing states, not what is necessarily correct. The vendor confirms dimensions, fixes missing values, and adds notes.
- Vendor commits to the takeoff. Once reviewed, the measurements feed the same fabrication engine, pricing catalog, cut list, and exports as any other measurement source.
When extraction fails or looks incomplete
- File too large: split the set and upload only the roof plan, elevations, and opening schedule.
- Blurry or scanned PDF: ask the architect or builder for a vector PDF exported from CAD/BIM software.
- Missing dimensions: some plans rely on callouts or schedules rather than dimension lines. The vendor can enter these manually in the review screen.
- Multiple buildings or phases: upload one plan set per building or phase to keep extractions clean.
Ready to try it?
Open any job, go to the Measurements tab, and upload a vector PDF or IFC under Architectural plan set. The vendor on the job can extract and review the measurements from there.
Start a free account